Pagina di supporto di pressa smart wifi eGO

Trova tutti i supporti tecnici per il tuo prodotto. Scarica la brochure tecnica del tuo prodotto, il manuale di istruzioni o trova piu’ informazioni sulla nostra sezione FAQ.

diver

Seleziona

diver

Scarica il tuo manuale di istruzioni o la brochure del tuo prodotto.

User manual for eGO

Scarica

Datasheet for eGO

Scarica
diver

Installazione tipica di eGO

Intallazione del tuo eGO

diver
  1. Quick flashes: Initial status. You can connect and pair in the app now.
  2. 3 Slow flashes, then a 1 second pause: Ready for AP connection.
  3. Flashes every second: Your ego smart socket is able to
    communicate with your network but there appears to be an issue with
    communicating with the outside world. Please check your Wi-Fi
    network and router.
  4. Flashes every second: Connection failure. Please reset the ego smart
    socket with a long press of the On/Off button, and then try again.
  5. No LED Light flashing: The ego smart socket is connected

Press the On/Off button on the ego smart socket until the Wi-Fi LED is quick flashing. After resetting, all the data in the socket will be removed and it’ll go back to initial status with the Wi-Fi LED flashing quickly. After resetting the ego smart socket, you’ll need to remove the item in the app. If you only remove the item in the app without a reset of the socket, it’ll still appear in your appliances list but name and location will be reset.

The ego is very secure, only people who know the password of your Wi-Fi network and are in range are able to control your sockets. There is also a lock function in the setup appliance page. If the ego is locked, others cannot find the socket even if they know your network password and are in range. We suggest that after all members search out the socket in their phones and then lock it if you want to lock your socket.

  1. The product only supports 2.4 GHz Wi-Fi Networks. Please connect the socket to a 2.4 GHz Wi-Fi Network. If your router has a frequency switcher please choose 2.4GHz, if not you will need to replace the router.
  2. The correct connection process is to add the ego smart socket to the Wi-Fi network via the app. After it’s connected the Wi-Fi LED on the socket will switch off. Once the socket has been added to the Wi-Fi network, any user will be able to use this socket with the ego app (other users should go to Appliance mode and pull down the page to refresh, to find the new sockets) so there is no need to perform the connection process again.
  3. After the connection process, the Wi-Fi LED keeps flashing quickly which means the socket hasn’t found a Wi-Fi network.
    • Make sure the socket and phone are in range of the Wi-Fi router. Different routers have different coverage. We suggest you move your smartphone closer to the socket during the initial connection stage.
    • The length of the Wi-Fi network SSID/password should be no more than 32 characters without spaces and special symbols
    • Suggested router setting (below setting is not a must, but in case you can’t connect with the socket, you can try to do the setting):
      • DHCP=ON
      • NPV=OFF
      • MAC Filter=Off
      • VLAN=Off
      • Router 2.4G & 5G: To make sure the socket is connected to the 2.4G network don’t use the same name for both the 2.4G net and 5G networks.
      • More for Apple router:
        • DHCP WAN Connection type 802.11 b/g/n
          DHCP+NAT PPPoE Static IP a(n)-802.11b/g
  4. Slow flashes of the smart socket Wi-Fi LED means the socket has found the Wi-Fi network but failed to connect.
    1. Check whether there are too many devices on the router. Usually home routers are able to support around 10 wireless devices and less than 20 devices in total. If there are too many devices on the router, disconnect them and try to connect again
    2. Check the Wi-Fi encryption on your router, WEP is not recommended when using the ego app
    3. Reset the socket and try again
    4. Try the AP connection
    5. Try phone hot spot method: Prepare the two smartphones A and B
    6. Enable the WLAN share hot spot on phone A. Phone A will release a Wi-Fi signal, then, go phone B’s Wi-Fi setting part and connect with Wi-Fi Network name from phone A. Run the ego app on phone B and try to connect the socket. If this works, it means some network settings need adjusting on phone B, if not it may be a faulty socket.
  1. Check whether the router AP isolation or Privacy isolation is enabled. If it is, disable this feature on the router.
  2. Restart the ego app under the same Wi-Fi network.
  3. Reset the ego smart socket.
  1. Check the phone and socket are connected to the same Wi-Fi network. If the ego app says the socket is offline, please check there is power to the ego smart socket by turning the on/off the button. If the ego app says it’s timed out then please remove the socket in the app, refresh the appliance page by pulling down the page and try again.
  2. The smartphone and the ego smart socket are not in the same Wi-Fi network. Please check whether the router is able to communicate with outside network and try to ping our server (54.183.18.195).
  1. If this happens at regular intervals, it may be because the DHCP lease time issue in the router (please consult the router manual).
  2. If this happens randomly, it may be because there are too many devices on the router.
  1. Power down the router for a while and then try again. (Excessive heat will influence the performance of router).
  2. Maybe someone reset the ego smart socket or pulled it out of the wall socket/outlet.
  3. DNS analysis failure. Power down the router for a while and then try again and reset the socket and then try again.
  4. If you can use the remote control function with Wi-Fi, but can’t through your 2G/3G/4G smartphone network, please check the 2G/3G/4G signal, maybe the coverage is bad in the area.
  5. Try another smartphone.
  6. Check the socket is in the DHCP client list and ping it.

Please check whether the SD card in the smartphone has been changed or modified. Faulty or new SD cards will cause loss of data

  1. If the timer is set without repeat days, it will only perform one time on that day. Select the Schedule timer or Random timer on the screen and check the days that you would like to timers to be set on.
  2. The timer is synchronized to the ego cloud server time setting.
  3. The timer circuit will over-ride all other functions including manual switching or standby eliminator. If another function is activated during a timer schedule the ego may switch rapidly for a minute or so. Try not to use or program any other function within a minute of the timer’s activation. Leave 1 minute between start and stop times and stop and start times.

In tests the overall performance is ±5% accurate.
Instant power updates every 5 seconds, the accumulated power updates every 5 minutes, the energy consumption graph updates every 30 minutes.

One app is able to control up to 100 ego smart sockets. Please note, as the number of sockets increase, the app performance will slow down. The processing speed of the smartphone will also affect the app response speed.

Once the ego learns the standby power of an appliance it will then recognise the appliance is power-on only when it’s power reading is above 1.5 times that of it’s learned standby reading.
After standby power is learned, the appliance will only be recognized as ‘used’ when it’s power value is 1.5 times above that of the standby power value.
Before you enable the standby eliminator, it will show you the accumulated waste in standby mode from the beginning of the devices history. After you enable the standby eliminator, it will show you the power saved only from the last time the appliance was on standby.

The socket is able to store the last 24 hours average power (in periods of 30 minutes) and the last 12 month’s daily kWh history.

The SDK-API belongs to efergy. We’re planning to open the SDK-API in the future, if you are interested please contact us customercare@efergy.com.

diver

Hai bisogno di aiuto?

Ricevi supporto dal telefono, chat o email.

diver